Smart utility management
A variety of energy saving initiatives have been implemented campus-wide by Asset Management Services (AMS), which have achieved significant environmental and financial savings. This includes utility cost savings of $1.5 million since 2012 and over 7,140 tco2-e emissions.
Building Management System (BMS)
An integrated Building Management System was implemented to provide real-time data on energy and water consumption for all individual buildings; giving an understanding of how electricity, mains water, recycled water and chilled water are used across the Sippy Downs campus. This enables real-time analysis of power and water use for reporting purposes and communications.
Power and water usage in all buildings on campus is centrally monitored by Asset Management Services. SMART meters are installed in all buildings on campus, with data collected from the meters fed back to a desktop application that allows real-time analysis of power and water usage.
The reports generated from the collated data are used to identify trends in power and water consumption, which can then be used to identify future conservation opportunities.
Much of the air-conditioning on campus is centrally monitored. This allows for better control, energy saving and quicker response time for breakdowns as a result of the system’s early warning capabilities.
The air-conditioning in the larger lecture theatres is being converted to a movement detection system rather than the current time schedule that operates continuously during teaching hours. This will result in significant power saving and removes the requirement for scheduling air-conditioning for after-hours events.
Conventional refrigeration air conditioning systems have been replaced with energy-efficient chilled water systems. Spiral filters are being implemented in the chilled water systems to increase efficiency by around 10% through the removal of excess dirt, air and metals from the water.
Variable speed pumps and smart controls have been added so chilled water is pumped at a rate consistent with the demand for air-conditioning, allowing a significant reduction of power used in times of low demand. This has led to ongoing savings of $38,535/year.
Smart CO2 sensors
Smart CO2 sensor controls were added to the campus air-conditioning system which sense the people load according to the amount of CO2 in the return air path and adjusts the supply of the air-conditioning accordingly. This has resulted in significant power savings as the cooling requirements are dependent on the number of people occupying the space at one time which removes the need for continuous cooling day and night. This has achieved an average saving in energy use of 50% for each upgraded building.
On-campus wayfinding lighting has been replaced with more energy efficient LED street lights, and T5 low energy fluoro tubes are in use across campus. These draw around 30 watts compared to 100-plus watts in conventional fluoro tubes.
The University has replaced all exit and evacuation lights with a system that provides 24/7 monitoring and eliminates the need for contractors to test and maintain the system.
High-level openings in the Sport Stadium allow additional daylight and exhaust of hot air, while split circuits allow for varied lighting levels.
In April 2015, the University combined all separate electricity meters into one virtual meter which created one account and one lower rate demand charge being payable per month. This resulted in the continuation of reduced electricity bills with a saving of up to $50,000/year for the Sippy Downs campus.
Contestable energy market
The University undertook negotiations with a number of Australian electricity retailers in 2012 which has brought a significant reduction of the amount payable per kilowatt hour (kWh); up to a 78% reduction for peak rates and a 66% for non-peak rates.